Gecko Control Bundle (4), HEAT RECOVERY CONTROLS with Pump, Pre-Installed Heat Recovery Jacket & Pump Cord

$735.00
0 reviews

Gecko: IN.YJ2 HEAT RECOVERY CONTROLS with Pump, Pre-Installed Heat Recovery Jacket & Pump Cord – Bundle (4): IN.YJ2-HR-PUMP-HR-CORD
Replacement Option For: HT-1000 Series Controls

The Gecko IN.YJ2 Heat Recovery Controls are the new and improved replacement option for the HT-1000 series controls originally designed around our Heat Transfer/Heat Recovery Jacket. The Gecko IN.YJ2 controller can also be fitted and used on any spa with our patented pump motor Heat Transfer/Heat Recovery Jacket.

The Gecko IN.YJ2 controller can also be used as a replacement for other controls designed for our Heat Transfer/Heat Recovery System, including controls made by Balboa and TecMark (TDI)

Bundle (4): IN.YJ2-PUMP-HR-CORD

Includes:

– Control: IN.Yj2 Heat Recovery with 15′ Cord with GFCI Plug – 120 Volts, 3 wires
– Topside: K-200 Digital with Temperature Readout
– Topside Adapter Plate
– Dual Heat & High Limit Sensor
– Mounting Brackets
– Light Cord with bulb socket (tub light fitting sold separately)
– Pump Cord Adapters: used with your existing pump cord
– Complete 1hp (1.5hp SPL) Pump/Motor with Pre-installed Heat Recovery Jacket
– Pump Cord

Pump & Motor Description:

Motor Description:
Mfg: Century / A.O. Smith
HP: 1 (1.5spl)
RPM: 3450
Single Speed
115 Volts
11.8 – 12 amps
HZ: 60
Frame: 56Z (48Y)
Thermally Protected

Pump Description:
Mfg: Vico/Balboa
1HP (1.5HP SPL)
1 1/2″ Center Suction x Side Discharge
48 Frame

Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs!

This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water.  The Thermal Wrap system will heat and maintain water temperature.  The system allows the motor to run cooler; increasing the motors longevity and efficiency.  There are no moving parts and nothing to wear out.  Made in the USA!

10 people are viewing this right now
IN.YJ2-4
Payments Accepted
100% Guaranteed Safe & Secure Checkout

Description

Gecko: IN.YJ2 HEAT RECOVERY CONTROLS with Pump, Pre-Installed Heat Recovery Jacket & Pump Cord – Bundle (4): IN.YJ2-HR-PUMP-HR-CORD
Replacement Option For: HT-1000 Series Controls

The Gecko IN.YJ2 Heat Recovery Controls are the new and improved replacement option for the HT-1000 series controls originally designed around our Heat Transfer/Heat Recovery Jacket. The Gecko IN.YJ2 controller can also be fitted and used on any spa with our patented pump motor Heat Transfer/Heat Recovery Jacket.

The Gecko IN.YJ2 controller can also be used as a replacement for other controls designed for our Heat Transfer/Heat Recovery System, including controls made by Balboa and TecMark (TDI)

Bundle (4): IN.YJ2-PUMP-HR-CORD

Includes:

– Control: IN.Yj2 Heat Recovery with 15′ Cord with GFCI Plug – 120 Volts, 3 wires
– Topside: K-200 Digital with Temperature Readout
– Topside Adapter Plate
– Dual Heat & High Limit Sensor
– Mounting Brackets
– Light Cord with bulb socket (tub light fitting sold separately)
– Pump Cord Adapters: used with your existing pump cord
– Complete 1hp (1.5hp SPL) Pump/Motor with Pre-installed Heat Recovery Jacket
– Pump Cord

Pump & Motor Description:

Motor Description:
Mfg: Century / A.O. Smith
HP: 1 (1.5spl)
RPM: 3450
Single Speed
115 Volts
11.8 – 12 amps
HZ: 60
Frame: 56Z (48Y)
Thermally Protected

Pump Description:
Mfg: Vico/Balboa
1HP (1.5HP SPL)
1 1/2″ Center Suction x Side Discharge
48 Frame

Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs!

This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water.  The Thermal Wrap system will heat and maintain water temperature.  The system allows the motor to run cooler; increasing the motors longevity and efficiency.  There are no moving parts and nothing to wear out.  Made in the USA!

 

Additional information

Weight 29 lbs
Dimensions 22 × 14 × 12 in
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Add to cart
Click outside to hide the comparison bar
Compare
0
0