Balboa Jetted Bathtub Pump – 1hp with Internal Air Switch, Cord, 115volts, Universal
Balboa Jetted Whirlpool Bathtub Pump – 1HP, Single Speed, 1.5″ Drain Down Suction x 1.5″ Center Discharge:
Description:
1hp
115volt
3450rpm
11.8 amps
1 Speed
Thermally Protected
Industry Standard -1 1/2″ Drain Down Suction with Center Discharge.
3′ Power Cord
Internal On/Off Air Switch (air switch connects via 1/8″ tubing to existing tub side air button)
Description
Balboa Jetted Whirlpool Bathtub Pump – 1HP (1.5 SPL), Single Speed, 1.5″ Drain Down Suction x 1.5″ Center Discharge:
Description:
1hp
115volt
3450rpm
11.8 amps
1 Speed
Thermally Protected
Industry Standard -1 1/2″ Drain Down Suction with Center Discharge.
3′ Power Cord
Internal On/Off Air Switch (air switch connects via 1/8″ tubing to existing tub side air button)
Note: Tub side air button not included
This pump also has built-in ports for adding a Thermal Wrap Heater Jacket. Read more about our patented Heat Jacket at hydrothermix.com
Note: The Thermal Wrap Ports are not drilled through on this pump for use without Thermal Wrap. If adding a Thermal Wrap the ports can be drilled through.
Optional- Thermal Wrap Description:
Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs!
Additional information
| Weight | 21 lbs |
|---|---|
| Dimensions | 18 × 10 × 10 in |
