Seller
Bathtub Pump: 3/4hp with Unions, Tee, Air Switch, Cord and Thermal Heat Jacket
Jetted Whirlpool Bathtub Pump with Pre-Installed Thermal Wrap Heat Jacket and Unions with Tee – Made in the USA
This pump with Thermal Wrap will fit and is a direct replacement for most all jetted whirlpool bathtubs, new or existing.
Included in this listing:
Motor:
3/4 HP Century Motor
115 Volt
10.5 Amps
3450 RPM
Internal Air Switch – (nipple accepts 1/16″ or 1/8″ ID tubing – connects to your tub side air button)
3′ Power Cord (standard 115 volt wall plug)
Pump:
3/4 HP
1 1/2″ Drain Down Suction and Center Discharge
2) 1 1/2″ Disconnect Unions – 1 1/2″ slip PVC
1) Tee 1 1/2″ Spg. x 1″ x 1″ Slip PVC
Also available in 1hp & 1.5hp
Thermal Wrap – Heat Transfer System (pre-installed)
Description
Jetted Whirlpool Bathtub Pump with Pre-Installed Thermal Wrap Heat Jacket and Unions with Tee – Made in the USA
This pump with Thermal Wrap will fit and is a direct replacement for most all jetted whirlpool bathtubs, new or existing.
Included in this listing:
Motor:
3/4 HP Century Motor
115 Volt
10.5 Amps
3450 RPM
Internal Air Switch – (nipple accepts 1/16″ or 1/8″ ID tubing – connects to your tub side air button)
3′ Power Cord (standard 115 volt wall plug)
Pump:
3/4 HP
1 1/2″ Drain Down Suction and Center Discharge
2) 1 1/2″ Disconnect Unions – 1 1/2″ slip PVC
1) Tee 1 1/2″ Spg. x 1″ x 1″ Slip PVC
Also available in 1hp & 1.5hp
Thermal Wrap – Heat Transfer System (pre-installed)
Additional information
| Weight | 21 lbs |
|---|---|
| Dimensions | 18 × 10 × 10 in |
